Solos 461x PP boot v1.5 SDRAM size = 0x1000000 Processor clock speed 264.0MHz Flash is Mirror_BIT device! mac addr : 00 22 6b e0 ae ce Flash is Mirror_BIT device! Finding flashfs partition...done. Image 'image' is a Linux kernel Trying to load initrd...none found Calling Configure_NVS_FromFile. Flash is Mirror_BIT device! Invalid Linux kernel command line support status. Using default info LZMA 4.05 00bXLinux version 2.6.11.12 (fred@localhost.localdomain) (gcc version 4.0.1) #53 Fri Aug 1 21:27:18 CST 2008 CPU: ARM1026EJ-Sid(wb)B [4106a262] revision 2 (ARMv5TEJ) CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Machine: Solos CX46xx, unknown variant Memory policy: ECC disabled, Data cache writeback Built 1 zonelists Kernel command line: console=ttyS0 root=31:2 mem=15M rw mtdparts=phys_mapped_flash:128k(boot),640k(kernel),3264k(fs),-(nvram) rootfstype=squashfs init_dma not supported PID hash table entries: 64 (order: 6, 1024 bytes) Dentry cache hash table entries: 2048 (order: 1, 8192 bytes) Inode-cache hash table entries: 1024 (order: 0, 4096 bytes) Memory: 15MB = 15MB total Memory: 13032KB available (1545K code, 492K data, 84K init) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 Generic PHY: Registered new driver NetWinder Floating Point Emulator V0.97 (double precision) squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher squashfs: LZMA suppport for slax.org by jro Initializing Cryptographic API Solos on-chip UART init. ttyS0 at I/O 0x0 (irq = 29) is a Solos UART io scheduler noop registered RAMDISK driver initialized: 1 RAM disks of 11268K size 1024 blocksize IP175: Registered new driver RTL18305SC: Registered new driver PPP generic driver version 2.4.2 NET: Registered protocol family 24 physmap flash device: 400000 at 38000000 phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank Amd/Fujitsu Extended Query Table at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. 4 cmdlinepart partitions found on MTD device phys_mapped_flash Creating 4 MTD partitions on "phys_mapped_flash": 0x00000000-0x00020000 : "boot" 0x00020000-0x000c0000 : "kernel" 0x000c0000-0x003f0000 : "fs" 0x003f0000-0x00400000 : "nvram" u32 classifier OLD policer on NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP established hash table entries: 512 (order: 0, 4096 bytes) TCP bind hash table entries: 512 (order: -1, 2048 bytes) TCP: Hash tables configured (established 512 bind 512) GRE over IPv4 tunneling driver ip_conntrack version 2.1 (120 buckets, 960 max) - 272 bytes per conntrack ip_conntrack_rtsp v0.6.21 loading ip_nat_rtsp v0.6.21 loading ip_tables: (C) 2000-2002 Netfilter core team ipt_random match loaded ip_conntrack_pptp version 3.0 loaded ip_nat_pptp version 3.0 loaded Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 NET: Registered protocol family 8 NET: Registered protocol family 20 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller VFS: Mounted root (squashfs filesystem) readonly. Freeing init memory: 84K init started: BusyBox v1.00 (2008.07.29-07:03+0000) multi-call binary init started: BusyBox v1.00 (2008.07.29-07:03+0000) multi-call binary new_init_action:action=1 Starting pid 14, console /dev/ttyS0: '/etc/rcS' mkdir: Cannot create directory `/etc/dnrd': Unknown error 30 led: module license 'Proprietary' taints kernel. will read pda file found header count=3586 dump_to_file Loading ether driver ... solos_eth_mii: probed Loading Conexant BSP... BASE MAC ADDRESS 00:c0:02:12:35:88 Starting Conexant drivers . Quantum v1.01 msc16 loaded Conexant drivers started starting task turbo_WhipTask DSL MSC16 imem 4096, dmem 2048 DSL MSC16 version 1.3 Loading Wireless ... Reading True PDA ... DRIVER VERSION: 3.0 addressof start is c08f4000 got cyan buf size_H2S 00000050, size_S2H 00000c80 sm_drv_tell_to_radio,shared_dgb_htos=c08f4000 sm_drv_tell_to_radio,shared_dgb_stoh=c08f4058 Returning Status: [0]. UART InitializedReceived the MAC Address trap MY INIT Called init... download uses obsolete (PF_INET,SOCK_PACKET) received link state trap: [108] bridge: can't decode speed from eth0: 0 device eth0 entered promiscuous mode received link state trap: [108] Error -22 writing a1 of port BisBCapability:B2/B2+ Error -2 writing a1 of port BisMCapability:M2+/M2 device br0 already exists; can't create bridge with the same name device eth0 is already a member of a bridge; can't enslave it to bridge br0. led cmd="l0 wlan_on=0 killall: syslogd: no process killed /etc/rcS: 135: cannot create /proc/sys/vm/pagetable_cache: Directory nonexistent killall: igd_upnpd: no process killed new_init_action:action=4 Please press Enter to activate this console. Starting pid 249, console /dev/ttyS0: '/bin/sh' BusyBox v1.00 (2008.07.29-07:03+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. #